The above fritzing uses a 5v relay , If you are using a 12v relay you need to connect an external supply for powering the relay.
This is the simple relay control operation, where the control can be feed to the arduino by using Labview frontpanel, This example uses 3 DC motor to represent switching ON and OFF of motor, this same program can be used to control many application for switching and a timer can be added for controlling timed control applications. The above circuit can be modified for the controlling of AC circuits too, be cautious when connecting with AC circuit, use AC circuit only when needed.
This video's about interfacing NI labview with SolidWorks.
You need NI labview, NI softmotion and solidworks with Motion analysis to successfully do this testing on your own.
More details are included in the video check it out and share your thoughts.
If you are looking for a detail video about how to interface solidworks and labview, you are on the right blog, this video has included all the details about how to interface these softwares.
This project uses solidworks, labview, softmotion and arduino.
CAD model is created with help of SoldiWorks, Labview used for creating control singnals, Softmotion used for interfacing LabView and Solidworks, Arduino is used for position command by the user, This video is particularly analyzes the inverse kinematics for the robot.
This video made by interfacing labview solidworks and arduino. check the blog about how to interface labview arduino and solidworks.
This project is about automatically turning on LED's , when the light intensity goes low. It uses a LDR, 10k , 220 ohm resistors, and arduino uno .
A very simple Easy to do automatic light controller in Labview , LDR connected to arduino and LDR reading are fed to Labview and can find the intensity of light, If the light intensity goes below the set level all the lights turned ON and Turn OFF if the intensity level is HIGH.
The above fritzing shows how the connection are established between arduino and the other components.
This project is about virtual prototyping and testing of the product using LabVIEW, SoftMotion, SolidWorks and Arduino
If you don't have time to test products in real time , Virtual prototyping is the answer for you, with the help of labview Softmotion its possible to interface solidworks and labview, by interfacing labview and solidworks , real time testing can be done in the virtual environment by applying the required parameters to the labview block diagram.
accurate motor calculation is possible with labview and solidworks.
If you are building a new product , before going for a physical prototype , interference between mechanical design can be resolved, accurate motion timing can be calculate with the help of softmotion.
If you are a product developer and use SolidWorks for your design, then you should contact LabVIEW for a checkout to look into SoftMotion.
It saves much time for machine builders, solving many problems that can occur in Inter engineering products example a mechatronics system.
